SMC Discussion Areas
May 18, 2024, 02:37:53 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Vendo 128-6 Compressor  (Read 3135 times)
0 Members and 1 Guest are viewing this topic.
pgorath
Guest
« on: November 09, 2011, 05:48:30 pm »

I just picked up a V128-6.  When I plug it in, the refrigeration unit on the inside turns on and sounds like it's working, but the compressor and fan at the bottom do nothing.  Just to see what would happen I unplugged the (compressor plug?) from a socket in the bottom of the machine and plugged it into my power strip and the bottom fan started right up...but then the compressor started smoking so I unplugged it.  I'm new to soda machines and don't really know where to begin. 
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #1 on: November 09, 2011, 06:17:13 pm »

the compressors start/run relay may be shorted, or it has some old & deteriorated wiring at that point on the compressor, did the smoke come out from underneath the terminal cover plate on the side of the compressor itself? it may be a metal-can or plastic box mounted directly on the compressor itself.
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
pgorath
Guest
« Reply #2 on: November 09, 2011, 10:01:44 pm »

Yes, the smoke (or fumes?) came out of the terminal cover on the side of the compressor.  A few hours later I plugged it back in again (the compressor cord) because I thought I'd shorted the whole thing, but the fan kicked on again and this time there didnt seem to be the smoke. 
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #3 on: November 12, 2011, 08:36:30 pm »

Hmmm  I'd pull the cover & check the wiring just to be sure before you burn your house down.   Oo


Now then, I assume it's only the condenser fan that's running & not the compressor, so is it or isn't it getting cold now?
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
pgorath
Guest
« Reply #4 on: November 17, 2011, 10:46:26 pm »

It doesn't get cold
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!