|
Title: wire management Post by: boss on September 03, 2013, 10:45:22 am I'm considering completely rewiring my USS-8-64K. The problem I'm having is finding replacement flexible sheathing/conduit to run the wires through. My machine originally used a clear, flexible plastic product called Temflex 105C, but I can't find a non-industrial or non-military source to purchase a small quantity from.
With that being said... what do you guys use as conduit/sheathing? My main concern is where it has to pass through existing holes in the door. Title: Re: wire management Post by: wee on September 03, 2013, 12:01:18 pm I used the clear tubing you can get at the big box stores on my Vendo 80....See pics below.
(http://1.bp.blogspot.com/-nViEXdYIcEI/UFKL99zQ7EI/AAAAAAAAAhg/79MdXQiuutU/s1600/DSC05342.JPG) Brian Title: Re: wire management Post by: johnieG on September 03, 2013, 04:24:18 pm Wee's correct, it's just clear PCV tubing sold at many big-box hardware stores.
Title: Re: wire management Post by: boss on September 03, 2013, 04:45:07 pm the problem I'm having is that the tubing they sell is not the correct diameter to fit through the pre drilled holes in the cabinet.
Title: Re: wire management Post by: johnieG on September 03, 2013, 06:00:10 pm ? It's a vending machine, not a vintage Corvette, use a drill... :laugh:
Title: Re: wire management Post by: boss on September 03, 2013, 06:35:36 pm you haven't seen me with a drill. :biggrin:
Title: Re: wire management Post by: Yarochrehc on September 03, 2013, 07:51:35 pm It does come in differant wall thickness
|