|
Title: VMC 44 Crank Handle Reinstall Post by: magpies35 on January 13, 2016, 08:49:06 am I have a VMC 44 that I cranked the vend handle half a turn counterclockwise to open the front door. I unpinned the handle to get it chrome plated and when I went to reinstall it, it has now dropped down to a three quarter turn counterclockwise and I cannot get it to turn clockwise to get it back to the original position to vend. It's jammed and will not turn in either direction. Do I need to take off the coin mechanism or is there an easier way to un-jam it?
Any help would be greatly appreciated. Thanks! Matt Title: Re: VMC 44 Crank Handle Reinstall Post by: MoonDawg on January 13, 2016, 10:41:33 am If you did not take the parts out of the inside of the handle before plating, they are now frozen stuck with chrome.
Time for the big tools. Title: Re: VMC 44 Crank Handle Reinstall Post by: magpies35 on January 13, 2016, 07:41:23 pm I guess I have some work to do.
Great information. Thanks! |