|
Title: Installing Tubular Rivets Post by: Pat Pixley on March 13, 2008, 10:42:11 pm John thought I should let you know about the rivet and how I installed them.
When you have your lid for you Ideal 55's reskinned and they dont reinstall the lid hinge's this is the the Tool you will have to install these tubular rivets with. What you will need is 6 tubular rivets & the HT 174 Hand Clincher then you will need to drill out the holes (I keep the hinges on and used a pencil to mark the holes) I took the hinge off and sliped the rivet in through the hinge and the lid and used the anvil on my bench vise ( wood top work bench does not work) two hit with my BIG hammer and it was set, then just repeat. it was real easy to do. You can find this at Graiger or go to www.hansonrivet.com you can also get the rivet's at True Value hardware or you can order from Hanson True Value was .10 cents each for the Rivets the Hand Clincher was $41 and some change those (True Value did not have the Hand Clincher) It was worth. |