SMC Discussion Areas
May 03, 2024, 05:00:08 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Uss-8-64 --- pan stays full of water  (Read 4546 times)
0 Members and 1 Guest are viewing this topic.
Guest
« on: June 13, 2002, 10:15:45 am »

Well, just as the title states, the pan underneath the machine stays full of water.  The drain tube runs down from inside the cabinet into the pan.  

The pan is overflowing with water.

Is there anything I can do?  The pan shouldn't be this full, right?
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #1 on: June 13, 2002, 08:17:35 pm »

sounds to me like you got quite a lot of condensation going on there! door gasket sealing tight? running the machine without a full load? or are you just "peaking in" alot? '<img'>
the pan normally has to be emptied more often in humid weather too, I've had to empty mine once every two days lately, if it's inside you can run a dehumidifier also to dry up the air.
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Guest
« Reply #2 on: June 13, 2002, 08:26:27 pm »

I didn't think it ever had to be emptied.   I thought that the heat from the compressor was supposed to evaporate the water from the pan.  

Oh well, if this amount of water is normal for not emptying it in a week, then I guess I'll come up with something.  

The machine will be sitting in my garage, so I could just extend the hose to drain outside.  I really don't want to have to pull the thing away from the wall every 2 days to empty the pan.

Anyone else?  Comments?  Suggestions?
Logged
Guest
« Reply #3 on: June 20, 2002, 10:27:46 am »

never had my pan fill up with any water at all...don't know what to tell you on this one.
Logged
Pat Pixley
Guest
« Reply #4 on: June 20, 2002, 12:22:29 pm »

I have used a big butter dish  for a drain pan  it holds a little more and it make's it easy to dump and the drain pan  that came with that machine  stay  clean and looks good when I sell it.

Pat. P.
Logged
Guest
« Reply #5 on: June 23, 2002, 09:21:24 pm »

johnieG is right! Look for gasket leakage, a hole in the cabinet, or someone looking in a lot.

Moisture quickly migrates to the dry air inside the box, quicker than "ambient" outside air around the box. Remember the old days when mom or dad would say "Close the door, your letting all the A/C out!". Well, what was really happening was the moisture was being sucked up by the cool dry air in the house, more than the heated air coming in.

Make sure all the door gaskets are good, and there are air no air leakage points. As a final suggestion, at the condensate drain, put a "P-trap". The trap will fill with water, sealing off moisture laden ambient air from coming in the condensate drain tube. Don't worry, it will drain.

I do know my Cavalier chest box dumps a lot of water, but it is outside, and the gaskets are all bad. I am in the procedd of restoring now, and should see a major reduction in condensate.

Mark
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!