SMC Discussion Areas

Soda Machines, Coolers & Dispensers => Syrup Dispensers => Topic started by: on February 17, 2004, 06:58:16 pm



Title: Dole super replacement gasket
Post by: on February 17, 2004, 06:58:16 pm
does any one know if there are replacement parts available for dispensers?

In reality all I am really asking about is the lid gasket.

I have 2 dispensers, a Dole Super and a Selmix and was wondering about where to bigin my search.

Thanks
keith


Title: Dole super replacement gasket
Post by: racerx45 on February 18, 2004, 04:52:37 pm
Keith-
  I don’t know of anyone reproducing rubber parts for dispensers.
  I don’t have a Super to look at but my Deluxe should be close to yours for comparison. There is one on the lid itself and another around the top of the dispenser tank, which one needs replacing? As for the Selmix I don’t have one to look at sorry.
Steve
P.S. can you post a few pictures of what needs replacing?


Title: Dole super replacement gasket
Post by: on February 19, 2004, 08:15:12 am
My Webpage

If you go to the above site, the same one i gave you in the last forum,  you will see pictures of the Dole dispenser. no seal on lid, only a large seal on body of dispenser, The selmix I don't currently have pictures of.

p.s. I appreciate all your help so far steve, also let me know when you get your dispenser book out of storage as i am curious about the info on the dole super.

Keith


Title: Dole super replacement gasket
Post by: racerx45 on March 14, 2004, 07:12:36 pm
Keith-
 The service manual I have only list replacement parts for the Dole Super and not much else. From the pictures on your web page I can’t really see what is wrong with the rubber seal. I did find a cross section of a super that show the seal and will post it below if that helps.