SMC Discussion Areas
May 03, 2024, 09:29:59 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Condensation build up  (Read 2328 times)
0 Members and 1 Guest are viewing this topic.
Guest
« on: August 01, 2004, 01:14:18 pm »

I have a caviler 64 square coke machine. It runs great but has a build up of condensation between the double glass windows on the door. Does anyone know how to fix this problem?   Brian
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #1 on: August 01, 2004, 06:06:16 pm »

Move to Arizona.... ':p' , some is normal, however, if the bottle door isn't sealing right, ie: sitting squarly against the rubber seal all the way around, you'll be leaking humid air into the machine all day long. use your ear & listen for the sound of the inside (evaporator) fan when the compresssor shuts off.
if you hear it excessivly load, try pushing on the door to see if it gets quiter, if so then you've found your problem. slip a large bladed screwdriver into the space between the hinge & the frame at a 90 degree angle to the door & gently (easy does it!) pry to the right about an 1/16" this usually does the trick in closing the door all the way. other things to check for are a dry/shrunken door seal, & busted springs, there are several screws you can adjust on the hinge side also to help square up the door in reguards to the frame....JohnieG




Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!