|
SIGNGUY
|
 |
« on: March 18, 2008, 01:04:08 pm » |
|
I learned this trick a few years back, and now that I have some machines I'm working on ... was able to photograph it. The Cardboard trick as demonstrated on another post works great too, but this is easy as well and only requires one person, a roll of painters tape and your machine to be restored.
1)Lay the machine on it's back, cut and lay in insulation, sides first. Before putting the back side insulation in, take a roll of blue 3m Painters tape (works best for me and won't damage paint). Stick one end to back of machine, as close to the side as you can, pull the tape up and compress the insulation to the side and pull tape around the side and fasten to outside of machine. Do this all around sides, spaced out around 4 inches or so apart... Lay in your back side insulation, which will hold the back of insulation in place.
2)grab the liner and slowly work it into the machine.. let the air escape through the holes in the cabinet that are already drilled for the condensor... do this slowley and don't force it, just work it in by applying pressure....
3) it should slide right in and insulation should remain in place as long as your tape on outside of machine holds...
4)once the liner is nearly seated properly... simply grab the outside peice of tape from edge, lift off and pull straight up and out and it will peel right off and leave insulation in place.
5) finish installing liner with spacers and such and walla, your done... see photos.. hope this helps.
|
|
|
|
|
Logged
|
Vendo 81A, B, and D
VMC Pepsi 81
VMC 7up 81
VMC Dr. Pepper 81 (being restored)
Orange Crush 81 (being created)
Glasco 50 original
Stoner Jr Candy Machines
U Select It Candy Machines
Vendo Coin Changer
Popperette Popcorn Machine
Seeburg G Original Juke
MS Pacman upright
Misc Gas pumps
Lo
|
|
|
|
BrianB
|
|
« Reply #1 on: March 18, 2008, 02:14:48 pm » |
|
Awesome pic's. It's great to be able to add this to my "toolbox", Thanks!
|
|
|
|
|
Logged
|
Brian
|
|
|
|
Custom Soda Works
|
|
« Reply #2 on: March 18, 2008, 02:37:21 pm » |
|
That is a great little trick , I will be using that on my next projected  Plus I think this would work alot easier on the upright machines. Just a question did you lay something under the machine ?? |
|
|
|
|
Logged
|
|
|
|
|
SIGNGUY
|
|
« Reply #3 on: March 18, 2008, 03:23:56 pm » |
|
Just a question did you lay something under the machine ??
 That's why it's all scratched up on back??? hmmm  No, I laid a blanket down on the floor first then just laid it on it's backside... |
|
|
|
|
Logged
|
Vendo 81A, B, and D
VMC Pepsi 81
VMC 7up 81
VMC Dr. Pepper 81 (being restored)
Orange Crush 81 (being created)
Glasco 50 original
Stoner Jr Candy Machines
U Select It Candy Machines
Vendo Coin Changer
Popperette Popcorn Machine
Seeburg G Original Juke
MS Pacman upright
Misc Gas pumps
Lo
|
|
|
|
Custom Soda Works
|
|
« Reply #4 on: March 18, 2008, 03:32:41 pm » |
|
: No, I laid a blanket down on the floor first then just laid it on it's backside...
Sorry it looked like paper  . |
|
|
|
|
Logged
|
|
|
|
|
Chedki
|
|
« Reply #5 on: March 18, 2008, 06:11:26 pm » |
|
Great tip ! Are all insulations for soda-pop machines the same? I have a Royal Crown Cola Ideal 55 slider that I will be restoring in the near future. It probably will need to have new insulation installed. So, what kind is needed for this particular machine?
|
|
|
|
|
Logged
|
Royal Crown Cola Ideal 55 slider
Nichol Kola Quikold Standard
|
|
|
|
Yarochrehc
|
|
« Reply #6 on: March 18, 2008, 07:34:47 pm » |
|
That's a great idea as well as the cardboard! |
|
|
|
|
Logged
|
Bob
Restored
Vendo H63B Coke in use in basement
Original
Vendo V/VF63/7 Pepsi in use
Restoring: Glascock Standard
(2) Vendo 63
(2)Vendo 90
Vendo 126 waiting for paint
VMC 56
Westinghouse WE-6
|
|
|
|
collecture
|
|
« Reply #7 on: March 18, 2008, 11:05:38 pm » |
|
That is pretty slick John!
Sometimes it is difficult to get a friends' help right when you need it, so it is always great to easily be able to do things yourself
|
|
|
|
|
Logged
|
Cav 27, 33 Emb., CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler (Rest.)
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-44SK, WD-5(2), WB60
Victor C-14
|
|
|
|
SIGNGUY
|
|
« Reply #8 on: March 19, 2008, 09:05:26 am » |
|
Great tip ! Are all insulations for soda-pop machines the same? I have a Royal Crown Cola Ideal 55 slider that I will be restoring in the near future. It probably will need to have new insulation installed. So, what kind is needed for this particular machine?
I am not certain about all machines, but I've used R19 unfaced for my machines, the width works well for the cabinet size and it fills nicely.. Before you dig into that SLider... read someo other posts on SMC here and make sure you know what your getting into... That is one of the hardest machines to restore, due to the cooling system coils inside the walls of the machine. Good luck, Thanks for checking in, and welcome to SMC! |
|
|
|
|
Logged
|
Vendo 81A, B, and D
VMC Pepsi 81
VMC 7up 81
VMC Dr. Pepper 81 (being restored)
Orange Crush 81 (being created)
Glasco 50 original
Stoner Jr Candy Machines
U Select It Candy Machines
Vendo Coin Changer
Popperette Popcorn Machine
Seeburg G Original Juke
MS Pacman upright
Misc Gas pumps
Lo
|
|
|
|
loman4ec
|
|
« Reply #9 on: March 19, 2008, 09:29:49 am » |
|
Signguy, That is a fantastic idea! That will work much better than the cardboard.
|
|
|
|
|
Logged
|
|
|
|
|
