cleaning gasket, vendo 90

[obs48167]

Does any one know what i could use to clean gray gasket for vend door, its in good shape but it is blacken in spots. Just trying to make it look better with out replacing it

Thank you for your time

Mark from Michigan

[collecture]

With good success, I have used a rag with Goof Off and then followed with a good soaking of Armor-All.

[johnieG]

go to Murrays auto parts or Auto-zone & get yourself a bottle of Wesleys' bleach-white for cleaning white-wall tires, &  bag of fine-grade steelwool, wear gloves & get a bucket of hot water & spray it down, & soak the steelwool in hot water & scrub....you will be amazed on how quickley it will come clean.  wipe off the remains with some shop rags or old towels you dont care about.

PS don't over spray & breath the mist of the bleach-white, it will irritate your throat. & DON'T get it on the aluminum trim as it will stain in milky-white which is a real bugger to get off.

[Pat Pixley]

Or you can soak it in Gas and throw a match on it ..  THAT WILL CLEAN IT UP  
Sorry  felling a little tired & a little wired   

 Johnie  is right the Wesley's works great.