Fan motor c-80-c  cavilier

(1/1)

:
I am looking for a back up fan motor as the one in my mine hangs up every now and then. I cleaned and oiled it and it seems to be o.k at this time. But just in case.
MO.#
#5KSP51AL55H (G.E Make)4W Single phase      (4PCW)

It has three mounting screws on the back to hold it in place.


                  O
        Screw Holes   8-32?
             O        O

Thanks in advance!
Rick

Jim:
Rick,

These are readily available through some of the Parts Suppliers as well as Grainger Supply so worrying about a back up isn't a problem... If you are having problems with the current motor, it may be time to replace it before it causes additional problems!

:
After looking at the Graingers book I can't seem to find a motor that will work. maybe Iam just missing it.Asthere are so many to choose from. lso I can call them but I do not want to change the mounting configuration as I would like to get one that I can just swap out.
Your thoughts?

Rick  

MoonDawg:
The perfect match is a G.E #5213.  Grainger carries it under part # 4M502.                                 Glen

Navigation

[0] Message Index