|
kenokarz
Guest
|
 |
« on: July 01, 2008, 10:22:47 pm » |
|
will im new to the soda machine stuff, more in to slot machines, but i got this coke machine and now i think the soda bug has bitten me, this machine works great except for the coin mech mars 5800 it wont take any coins, so i found the coil that trips the buttons and put free vend in, here are some pics of the machine dont mine the pepsi and mountin dew in the coke machine,  what would be the value of this type of machine, i also need the plastic flap door as you can see in pic its broke, also the chrome door parts if someone has a good set ,what size light bulbs does the use for the sold out lites this machine was missing all of them if any one has let me know |
|
|
|
« Last Edit: July 01, 2008, 10:30:59 pm by kenokarz »
|
Logged
|
|
|
|
|
kenokarz
Guest
|
|
« Reply #1 on: July 01, 2008, 10:26:57 pm » |
|
here is some more pics
|
|
|
|
|
Logged
|
|
|
|
|
GreginNM
|
|
« Reply #2 on: July 01, 2008, 10:32:32 pm » |
|
Welcome to the board! Yes, this is a very addicting hobby! That will likely be your first of several. You will find a fantastic group of folks here that really enjoy soda machines and enjoy helping others just as much. I'm sure you will find help with anything you need for your machine...just ask!
Greg
|
|
|
|
|
Logged
|
Greg
Vendo: 39B, Standard
Jacobs: 35
Ideal: 35 DP
Westinghouse: WB-66-MD, WD-10, Junior, Standard
SelectiVend: S-48 DP x 2
SelVend: S-47 7up
|
|
|
|
johnieG
|
|
« Reply #3 on: July 02, 2008, 07:45:32 pm » |
|
welcome to the site!
The sold out bulbs are standard C7/night light lamps, 4 to 7 watt/120 volt, or you could use the original 7watt 120 volt S6 style /indicator lamps ( from Lowes in the lightbulb isle in the pull-out bin section).
I have a delivery flap I belive in my parts boxes, & which chrome pieces do you need? the whole delivery chute? & is yours chrome plated plastic or plated metal? ( I have a metal one in good shape too)
JohnieG
|
|
|
|
« Last Edit: July 02, 2008, 07:49:10 pm by johnieG »
|
Logged
|
Spoon-feeding Newbies since 2001...  Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
kenokarz
Guest
|
|
« Reply #4 on: July 02, 2008, 09:09:33 pm » |
|
i need the chrome ones, whats the cost of the parts  i also need to know if the mars 6200 coin mech will work with this machine or if anyone has any ideas on whats wrong with mine, it has power because when you hit the switches, you can get it to drop quarters, dimes and nickels, may be my dip switches are set wrong im using a mars 5800 now, |
|
|
|
|
Logged
|
|
|
|
|
johnieG
|
|
« Reply #5 on: July 03, 2008, 09:37:25 am » |
|
Please double-check which type you have, By "chrome" I assume you meant the heavy metal ones, not the plastic/chrome plated ones, there is a difference between the two types of delivery chutes ( the way the mount into the machines front door) it's yours for the cost of shipping. send me an email by clicking on the little envelope symbol under my profile ID. & send me your mailing address then.
the 6200 coinmech should be fine, so long as it has the "Jones" connector has 8-pins ( you dont count the round index pin) & its rated for 120 volts. as for the 5800 coinmech, if it has an electronic coin detector/slug rejector (called the flight-deck) it may just need to be recalibrated to accept the correct coins. you can find the correct switch settings & the recalibration procedure at the MARS website.
|
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
Ocelp
Guest
|
|
« Reply #6 on: July 03, 2008, 02:13:27 pm » |
|
...it's yours for the cost of shipping...
This site is great, from answering questions about my machine to stuff like this- it's sure nice to see folks being genuinely helpful & friendly. (pats on the back for everyone) |
|
|
|
|
Logged
|
|
|
|
|
kenokarz
Guest
|
|
« Reply #7 on: July 04, 2008, 09:16:26 am » |
|
Please double-check which type you have, By "chrome" I assume you meant the heavy metal ones, not the plastic/chrome plated ones, there is a difference between the two types of delivery chutes ( the way the mount into the machines front door) it's yours for the cost of shipping. send me an email by clicking on the little envelope symbol under my profile ID. & send me your mailing address then.
the 6200 coinmech should be fine, so long as it has the "Jones" connector has 8-pins ( you dont count the round index pin) & its rated for 120 volts. as for the 5800 coinmech, if it has an electronic coin detector/slug rejector (called the flight-deck) it may just need to be recalibrated to accept the correct coins. you can find the correct switch settings & the recalibration procedure at the MARS website.
thanks that would be great, here are the pics of what i need
|
|
|
|
|
Logged
|
|
|
|
|
kenokarz
Guest
|
|
« Reply #8 on: July 06, 2008, 11:07:05 pm » |
|
checked to mars website maybe im at the wrong one could not find anything about the coin mech, can someone show me the link i need, also just bought me 2nd machine today
got a dixie narco 348 coke machine picking it up tomorrow we will see when i get it home
to see how much work this on is, saw it today it cooled fine 40 degress in about 15 mins of plug in ,
|
|
|
|
|
Logged
|
|
|
|
|
davethebirdman
|
|
« Reply #9 on: July 07, 2008, 05:54:29 am » |
|
That's not bad.... Less than a week and you have two machines...
Well, you can't be a collector until you have at least tow of something...
Welcome to the addiction...
You might want to have a search of the archives re your coin mech... I recall something similar being posted..
Dave
|
|
|
|
|
Logged
|
|
|
|
|
kenokarz
Guest
|
|
« Reply #10 on: July 14, 2008, 07:17:17 am » |
|
anyone know where i can get a coin switch for my caliver c4-96g, # on side of switch shows dmh-11at ? email me if you have or know where i might be able to buy local |
|
|
|
|
Logged
|
|
|
|
|
kenokarz
Guest
|
|
« Reply #11 on: July 15, 2008, 01:13:53 pm » |
|
got my manual today from soda musuem so that will help a lot on this machine, now when i ask i might even know what im talking about,  |
|
|
|
|
Logged
|
|
|
|
|
