How to make a Large Door Coin Mech Free Vend and easily reverse it!

[scalebowler]

FYI this is a dead link.

Here is the one that works. http://soda-machines.com/discussions/index.php/topic,871.0.html

[Jim]

Thanks for posting the correct link!

[collecture]

I was playing around with a non change-giver mech the other day and this procedure will work on the non-change-giver; however, you need to unattach the dime finger spring when you put the extension spring on the nickel finger. To make it a coin vend, unattach the extension spring and reattach the dime finger spring over the nickel finger bar.
What happens when you leave the dime finger spring attached is the dime finger doesn't fall down after the coin passes; therefore, it gets stuck against the top of the coin block bracket and it needs to pass under the top of the bracket.