SMC Discussion Areas
November 23, 2024, 11:59:48 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Picture of stuck Coke  (Read 2331 times)
0 Members and 1 Guest are viewing this topic.
cokentn
Guest
« on: January 21, 2008, 10:28:05 am »

Ok, here is a picture of the stuck Coke..any suggestions???

Thanks,
Mark
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #1 on: January 21, 2008, 10:36:54 am »

A bottle opener & a very long straw!?   tounge

seriously though, try to push it back up into the column from below, yeah the new coke bottles are a bit skinnier around the lower "hip" area that the old ones & tend to cause trouble, you may have to adjust your vending gate/rods so they don't open so wide, and be sure to alternated the bottles as they are stacked into the column(s) one left, then one to the right, so they dont drop all at once. you may have to fasion some column side-spacers (shims) to reduce the width of the racks so that the little bottles dont slide past the rods & the column wall.

Ps, what machine is this ( my guess is a Vmc 44) , or maybe you could loosen/remove the rod on the side that the bottles stuck on?
« Last Edit: January 21, 2008, 03:06:54 pm by johnieG » Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom


« Reply #2 on: January 21, 2008, 02:53:15 pm »

If you can't slide the bottle up towards the necks of the other bottles and get it up or down and out, then, like johnnieG said - open it, syphon it out or drink it with a straw and bust the bottle with a hammer. See if you can put some cardboard or poster board underneath to catch the glass bits.
You will need to shim your columns with the new bottles.
Good Luck!
Logged

Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!