Need V80 Bottle Rack Mounting Help

[glenp87]

Hi everybody,

Can someone send me pics/specs of how the bottle rack is mounted inside the V80. I have the two large bolts that the unit hangs from...but no other mounting hardware nor instructions on how it is braced inside the box and the dimensions on how far inside it sits and how high/low.

Thanks for any help,

Glen

[MoonDawg]

      The stack hangs from the two bolts on top, don't tighten them.......they are for adjusting the bottle chute height.

      There are 4 brackets that hold the stack tight against the back wall as shown. They swivel up for stack removal.

[glenp87]

Hi MoonDawg,

Thank you very much....I can easily fabricate the brackets...the original holes are still in the cabinet.

I assume the two extended brackets (see red arrow in attched pic) that hold the lead screw that turns the rollers actually touch the back cabinet when the rack is mounted?

BTW,,,This is a wonderful siteand folks like you are an invaluable help.

Glen

[glenp87]

Gle,

Got is set up...could I ask a favor...couls you please send me a few detailed pics/specs of the Sold Out Lever...I have the main bracket and switch - but nothing else...I would like to try to make one since I cannot find one.

Thanks very much,

Glen

[MoonDawg]

         Sorry, my sold out flag is missing

[glenp87]

Thanks,,,,appreciate the feedback....maybe parts for a v80 will show up at some point

Glen