SMC Discussion Areas
November 23, 2024, 09:19:18 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > The Coin Return > Other Coin-Op's (Moderators: johnieG, Jim, dr galaga) > Robotron:2084
Pages: 1 2 3 [4]  All   Go Down
« previous next »
  Print  
Author Topic: Robotron:2084  (Read 20609 times)
0 Members and 1 Guest are viewing this topic.
bubba
Soda Jerks
*****
Offline Offline

Posts: 3021
« Reply #30 on: September 15, 2007, 07:02:36 am »
Frank.. do you have the iso hooked up also? The 6.3vac is for the lights on the P1/P2 buttons. I want to get this done today so I can get my basement back together... I've got machines and tools all over the place..
Logged
Ken

V-63 -Bottles
2-Cavalier USS-64
VMC ST56B Royal Crown - being built
Vendo HA56C Coke
2-V63C DP
V63C Coke
U-Select-It 5cent candybar machine
Malinut
Newbie
*
Offline Offline

Posts: 43
« Reply #31 on: September 15, 2007, 12:12:49 pm »
On both machines, monitors are still powered through the iso.  I have attached some pics of how my switcher is hooked up.

1st pic is how my switcher is mounted, PS board and heat sink were removed, switcher on plate.  The green and white wires are going to power block and power the switcher.

The 2nd pic is my power block,  you can see how the ground and hot wires (green and white) are attached.

You can also see a 12pin molex connector coming out of block, 2 of these wires are going to monitor for power.

They look like either brown/yellow or purple/yellow.

Hope it helps, pics are not great, it was a little tight.

Frank
Logged
Pages: 1 2 3 [4]  All   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!