squar top vendo

[tim]

I finly got my matchiene to vend.Its a vendo220/125 if i load cans theres no problem . But when i load botels (water and beer ) it goes through 2 cycles that wont vend then 2 cycles that will and so on.Can somewon help to solve this problem.

[johnieG]

Yo have to adjust the vending motors control disk, normally there are four-notches visable for double-depth can vending, you need to loosen the screw  & rotate the white disk so that only two notches are visable, (then snug up the screw, but not too tight, or you'll strip the threads out of the red disk)

[tim]

'> thanks for the help .its my first machine so i dont have a lot of knowhow but once again thanks.