|
Guest
|
 |
« on: February 01, 2007, 10:46:45 am » |
|
I have a Vendorlator VF 110F-A (7-Up) from the 60's. IT is a square top machine and very similar to the VF90. I am having trouble locating a manual because everything Vendorlator 110 points me to the early round tops...V110 Vendo does the same thing.
Any ideas on where to download one?  '>
|
|
|
|
|
Logged
|
|
|
|
|
BrianB
|
|
« Reply #1 on: February 01, 2007, 11:37:23 am » |
|
Welcome aboard Mngnoah! Great to have you around. My first guess would have been Cola.Machines.com but after a quick check, they don't seem to have a VF110 manual. I'm pretty positive somebody here has one though.
What exactly are you needing to know about your machine. There are a bunch of guys and gals here that have years of knowledge and are very willing to help out.
Oh yeah....Got an pic's of your machine? We LOVE pictures!!  '>
|
|
|
|
|
Logged
|
Brian
|
|
|
|
Guest
|
|
« Reply #2 on: February 01, 2007, 11:46:31 am » |
|
I'll post some pics as soon as I can get them downloaded. The machine is dirty but straight with good signage. It is lighted in the door also.
I am going to eventually restore this, probably as a them machine, but for now, I need to get a good wiring diagram to redo the harness. I also need to put it in free vend and replace the coin mech.
The mechanicals are good and quiet. It cools to a steady 34F.
|
|
|
|
|
Logged
|
|
|
|
|
sodaworks
|
|
« Reply #3 on: February 01, 2007, 11:01:36 pm » |
|
Welcome aboard mngnoah!
I may have a manual for you. I'll check tomorrow.
|
|
|
|
|
Logged
|
TERRY@SODAWORKS RESTORATIONS
Lots of Round Top machines
Buy-Sell-Trade-Restorations
|
|
|
|
loman4ec
|
|
« Reply #4 on: February 02, 2007, 05:52:40 am » |
|
The wiring harness will be the exact same as the VF90 or 56
|
|
|
|
|
Logged
|
|
|
|
|
Guest
|
|
« Reply #5 on: February 02, 2007, 06:08:04 pm » |
|
Sodaworks,
Any word on that manual? If the VF90 version would work, I would settle on it until I can find the VF110 version.
I took some pictures yesterday evening. I promise I'll post them this weekend.
|
|
|
|
|
Logged
|
|
|
|
|
BryanH
|
|
« Reply #6 on: February 03, 2007, 10:19:20 pm » |
|
I had a 110 & 56. Used the Vendorlator manual from Funtronics. Worked fine. Doesn't help a lot on parts but the general mechanisms & wiring works.
|
|
|
|
|
Logged
|
Thanks, Bryan
Cavalier USS-96: unrestored, working on the back patio
CV VUB/C 8-91: a fantasy restoration?
GE Cooler: in pieces, my next project
|
|
|
|
Guest
|
|
« Reply #7 on: February 06, 2007, 12:37:55 am » |
|
My picture files are too large for this site and I can't get snapfish to post as a url. I will try again with lower res pictures tomorrow.
I was able to use the machine during our SuperBowl party. I set it up for free vend using the info from this forum. I've had to replace bulbs and starters, and clean/lube the vend mechanicals, but other than that, all I've done is clean off 40 years of grunge.
The klixon started cycling once as it pulled the full load of warm beer down to serve temperature, but after I unplugged it for a few minutes to cool, it has not kicked out again. Temperature is staying in the mid 30s range.
Now, if I could just find a manual on this thing!
Thanks for the help. I've bragged alot about this site and the friendly people posting here!  '>
|
|
|
|
|
Logged
|
|
|
|
|
loman4ec
|
|
« Reply #8 on: February 06, 2007, 01:44:37 am » |
|
Like said earlier your machine is basically a bigger V90 or 56. The manual will be basically the same. Your machine will have all the same electrical workings and the same cooling system, as well as coin mech and so on. I would just get a late model V90 or 56 manual
|
|
|
|
|
Logged
|
|
|
|
|
sodaworks
|
|
« Reply #9 on: February 06, 2007, 12:39:31 pm » |
|
Sorry, I thought I had a 90 manual but I don't. SodaJerk works or Funtronics will have one.
|
|
|
|
|
Logged
|
TERRY@SODAWORKS RESTORATIONS
Lots of Round Top machines
Buy-Sell-Trade-Restorations
|
|
|
|
