|
bubba
|
 |
« on: December 12, 2006, 09:38:33 pm » |
|
Square tops are following me home lately. I just got another clean looking 56 bottle machine at a good price.. Probably the nicest looking woodgrain machine I've seen...
Then my buddy just picked up a 56 can machine that was on ebay... needs a paint job, but complete working machine... Then my DP 63 can machine, and possibly a good looking v63 bottle machine...
|
|
|
|
|
Logged
|
Ken
V-63 -Bottles
2-Cavalier USS-64
VMC ST56B Royal Crown - being built
Vendo HA56C Coke
2-V63C DP
V63C Coke
U-Select-It 5cent candybar machine
|
|
|
|
coke_and_stuff
|
|
« Reply #1 on: December 13, 2006, 06:25:41 am » |
|
Great find those little 56 machines are cool.
Joey
|
|
|
|
|
Logged
|
Collector of nice original paint machines
Vendo 81 B, C, D
VMC 81 Pepsi, 7up, RC, Generic
6CV Coke, RC, Pepsi
VMC 110 RC
Vendo 39
Jacobs 26
Mills 47
Selectivend 64 7up NOS
Plus 30-50 parts and project machines
|
|
|
|
bubba
|
|
« Reply #2 on: December 13, 2006, 06:51:14 am » |
|
The 56's seem like they are made with Chinese steel and the 63 with American steel or something. Most 56's I've found either have rust or paint chipping all in the same place and they are much lighter than the 63. I do like the them for the price I've been getting them at.. I really want a Pepsi one..
Is the can/bottle stack and shelves interchangeable between the 56 and 63? I know the evap is located in a different place, but do the lines reach to interchange the refrigeration system?
|
|
|
|
|
Logged
|
Ken
V-63 -Bottles
2-Cavalier USS-64
VMC ST56B Royal Crown - being built
Vendo HA56C Coke
2-V63C DP
V63C Coke
U-Select-It 5cent candybar machine
|
|
|
|
coke_and_stuff
|
|
« Reply #3 on: December 13, 2006, 07:01:09 am » |
|
Wouldnt be hard to make that one into a Pepsi. I have a fairly nice original non lightup pepsi sign. I also have a very nice lightup but im keeping the frame. Is your coke a lightup?
Not sure if the parts are interchangable from a 56 to a 63 But if you do decide to part out a 56 let me know I need parts.
Joey
|
|
|
|
|
Logged
|
Collector of nice original paint machines
Vendo 81 B, C, D
VMC 81 Pepsi, 7up, RC, Generic
6CV Coke, RC, Pepsi
VMC 110 RC
Vendo 39
Jacobs 26
Mills 47
Selectivend 64 7up NOS
Plus 30-50 parts and project machines
|
|
|
|
bubba
|
|
« Reply #4 on: December 13, 2006, 08:02:41 am » |
|
This new one I don't believe lights up. I don't want to change a coke to a pepsi machine.... I've come to the realization that I can do anything on these machines, but for some reason I can't get around to paint. I still have this RC 56 machine in pieces all over my garage... Body work is about 80% done. Inside parts are almost all done.. I need to find a body shop that will finish the body work and paint for me as it appears I won't get around to finishing it.
I may be parting out a non lightup coke 56 can machine.. its all working, but its in horrible need of a paint job.
|
|
|
|
|
Logged
|
Ken
V-63 -Bottles
2-Cavalier USS-64
VMC ST56B Royal Crown - being built
Vendo HA56C Coke
2-V63C DP
V63C Coke
U-Select-It 5cent candybar machine
|
|
|
|
collecture
|
|
« Reply #5 on: December 13, 2006, 08:16:46 am » |
|
I have a Vendo manual that covers the H56F, H63E, H90F,
H126G and the H154E. Let me know what parts you are curious about swapping
between the 56 and the 63 and I'll look to see if the part numbers are the same.
|
|
|
|
|
Logged
|
Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
|
|
|
|
bubba
|
|
« Reply #6 on: December 13, 2006, 08:21:02 am » |
|
I'm curious of the stacks and shelves are the interchangeable...
|
|
|
|
|
Logged
|
Ken
V-63 -Bottles
2-Cavalier USS-64
VMC ST56B Royal Crown - being built
Vendo HA56C Coke
2-V63C DP
V63C Coke
U-Select-It 5cent candybar machine
|
|
|
|
collecture
|
|
« Reply #7 on: December 13, 2006, 09:18:57 am » |
|
Looking at the manual, here is what I found:
1. The bottle shelf - 56= part#105371-1 & 63=part#105371
2. The can shelf - 56=part#111549-2 & 63=part#111549-1
The bottle stack has a different assembly number between the 56 & 63; however, the only differences are:
The 63 has a spring clip near the bottom of the slide channel assembly and the 56 doesn't and the Eyelet weld assembly on the 56=part#105379-3 & 63=part#105379
The can stack also has different assembly numbers between the two models, but the only part number differences I can see is:
The back channel assembly on the 56 has part#108373 & the 63 has part#105480 and the side channel on the 56=part#321405-1 and the 63=part#321016-1.
So almost all of the parts have the exact same part number.
I know it sounds confusing, but I hope it makes sense.
Let me know if you need more info.
|
|
|
|
|
Logged
|
Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
|
|
|
|
sodaworks
|
|
« Reply #8 on: December 13, 2006, 09:58:13 am » |
|
Nice find, That's a clean little machine.
|
|
|
|
|
Logged
|
TERRY@SODAWORKS RESTORATIONS
Lots of Round Top machines
Buy-Sell-Trade-Restorations
|
|
|
|
Kevin C
|
|
« Reply #9 on: December 13, 2006, 11:46:33 am » |
|
Hello
Yes the bottle stacks & can stack can be moved between the machines with no problems.
When I installed a can stack in my V63 I used new self tapping screws on the left side of the stack to mount it because the holes did not line up.
Kevin
|
|
|
|
|
Logged
|
Vendo 63-C On the job
Vendo 56 Going back together
Vendo 56-C Waiting for rehab!
Vendo 126 Rough outside but loaded & operational
Vendo 110 Under repair
Ideal 55 - **For Sale make offer
Glasco 55 - Waiting
Royal 650 On the job
Lance Snack Machine - On the job
|
|
|
|
bubba
|
|
« Reply #10 on: December 13, 2006, 12:23:10 pm » |
|
Tom.. Thanks for the research.. Once I bring this one home, I'll have a can and bottle machine of a 56 and a 63. I'll try to compare shelves and see what the difference in the dash # is. As far as the stack goes, I'll try to pull one and put a 56 into a 63 and see what happens...
Edit---- Thanks Kevin... you saved me the trouble  '>
|
|
|
|
|
Logged
|
Ken
V-63 -Bottles
2-Cavalier USS-64
VMC ST56B Royal Crown - being built
Vendo HA56C Coke
2-V63C DP
V63C Coke
U-Select-It 5cent candybar machine
|
|
|
|
collecture
|
|
« Reply #11 on: December 13, 2006, 01:02:33 pm » |
|
QUOTE When I installed a can stack in my V63 I used new self tapping screws on the left side of the stack to mount it because the holes did not line up.
That must be the difference in the Eyelet Weld Assembly on the 56=part#105379-3 & 63=part#105379. The bottle stack face plate is what the manual calls the Eyelet Weld Assembly. How many screws attach each stack? I wonder if the (-3) could denote mounting screw holes.
|
|
|
|
|
Logged
|
Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
|
|
|
|
coke_and_stuff
|
|
« Reply #12 on: December 13, 2006, 05:55:09 pm » |
|
If you deside to part that one out I need shelves, maybe the condensation pan, and the cap and coin boxes
Thanks
Joey
|
|
|
|
|
Logged
|
Collector of nice original paint machines
Vendo 81 B, C, D
VMC 81 Pepsi, 7up, RC, Generic
6CV Coke, RC, Pepsi
VMC 110 RC
Vendo 39
Jacobs 26
Mills 47
Selectivend 64 7up NOS
Plus 30-50 parts and project machines
|
|
|
|
bubba
|
|
« Reply #13 on: December 13, 2006, 09:57:50 pm » |
|
I'll let you know.... I need the coin box for another machine, and the cap catcher is missing. I'll let you know on the rest...
|
|
|
|
|
Logged
|
Ken
V-63 -Bottles
2-Cavalier USS-64
VMC ST56B Royal Crown - being built
Vendo HA56C Coke
2-V63C DP
V63C Coke
U-Select-It 5cent candybar machine
|
|
|
|
rogerz
Guest
|
|
« Reply #14 on: December 14, 2006, 10:27:00 am » |
|
I might be interested in the door.
rz
|
|
|
|
|
Logged
|
|
|
|
|
Ridewithme38
Guest
|
|
« Reply #15 on: December 14, 2006, 04:14:32 pm » |
|
Congrats on the find!
|
|
|
|
|
Logged
|
|
|
|
|
