EASY TO FIND PARTS WANTED

[coke_and_stuff]

Looking for parts that are easier to find than usual.

light up signs with frames
Vendo 56 shelves
Cavalier 64 shelves
Cavalier 64 parts what do you have?
Vendo 56 parts what do you have?

Building up several machines for a route wanted good usable machines.

Joey

[davet426]

lighted working sign

Don't know if this what you are looking for, but here it is...

[coke_and_stuff]

Yes thats exactly what im looking for but trying to keep them under $25.00 sign frame is all I really need any size as i can make them all work

Thanks

Joey

[davet426]

I'll try again...

4 sign faces @ $26

[MoonDawg]

I have'nt done this yet but the sign frames are made with
4 pieces of channel which are cut at 45 degrees at each end and connected together.  A large frame can be disassembled and cut
to desired size.

[coke_and_stuff]

Glen thats what im about to try and acomplish, Dave Just need the frames.

Joey

[BrianB]

I attempted to cut my own sign frames out of aluminium angle and shortly found out that I didn't have the right tools/set-up to accomplish the task cleanly and with the exact angle each time.

I ended up goig to a local frame shop that does a majority of their own work on site unlike Michaels & Hobby Lobby which ship off all custom framing orders.

After describing what I wanted, the owner took me back and showed me the saw that he was going to use. To get a PERFECT 45 degree cut everytime he uses a VERY expensive miter table saw desigend specifically for cutting 45's. Turned out really nice.

After all of that, I decided that it would be cheaper and I would have less time/money in it if I went a different route. A custom frame made by Michaels ($15) and a couple of pieces of plexi (one clear one opaque) and a vinyl decal.

[coke_and_stuff]

I'll see what I can do, Shouldnt be to hard. I'll post some pics when I get to that point.

Joey

[davet426]

Well I'll try a different route. Have you seen these? I  layed carpet in my young pup days and we would use these to angle cut metal where carpet meets vinyl. Don't know if they would work. If you have a carpet tool wholesaler in your area you could probably take it there and try them??? They may sell something similar at a hardware store?

Sure you don't want any plastic signs I can keep find'n em :'>

Metal notching tool

[coke_and_stuff]

Thats a neat tool, Prob alot of $$ I didnt see a price.

Joey

[davet426]

$135.00... Hey! it's cheaper than 10 purchased frames... Might be able to find em cheaper?

mitre tool

[Kevin C]

Hello

Have parts from two V-63 & V-56 to include can & bottles shelves, metal face plates, cooling units that need work.

Let me know & I will go through my parts this weekend when I am putting away the Christmas lights

Kevin