I need wiring and parts!!!

[jasmine64]

Thanks everyone. I'll be getting in touch soon.

(Joesquid) The machine is a V63-7 if that helps.

[joesquid]

Ahhhh...
Guess my illiteracy must be showing...thought I read somewhere it was a squaretop 56.  I haven't taken a hard look at the wiring in this machine but should be able to create a new harness from scratch.  It'll take some time as I'll need to yank mine to do measurments, etc.  How soon do you need it?  Mind you now, I have the following charges in addition to parts/labor:
Skinned knuckles - $500
Badly skinned knuckles (requiring band-aid) - $850
Gouged fingers / superficial cuts - $1199
Bruised elbows - $150
Really bad bruises resulting in curse words becoming audible - $700
Curse words overheard by my kids - $5000/word

Let me know when you need it.

[joesquid]

Jas,
One other thing.  Can you tell me when your machine was made?  I want to make it's close enough in age to mine (early 60s model) in hopes the harnesses are similar enough or (hopefully) exact duplicates.

[jasmine64]

It is a squaretop, I'm guessing 64. Could be off a little.

[BryanH]

Quote (Skeleton Man @ May 13 2005,9:55)

Newark has the jones sockets here..

I followed that link and the connector picured only has 7 pins (6 plus the round one).  Have you purchased this p# before and received the 9 pin connector?

[BryanH]

Jasmine - some more ideas if you still need them.  

Light socket for the vending door  -> I was looking for a similar assembly /clip for the exact change light.  I wasn't been able to find any oringinal replicas for these but was pointed to using a candelabra socket from home depot / lowes.  They have clips and screw locks.  This is what I'll use for my exact change light.  Might work for you also.  For a beter description (and pictures) search the forums for candelabra for posts in 2005.  You should come up with the original input (i think from Brian) that I received.

Locking clip for connecting the wires from the door to the cooling system: similar issue. couldn't find the exact match so I went to Radioshack and bought both male and female connectors.  You can see them here, and they come in many different connector options (2, 4, 6 or 8 pins).

Hope it helps

[Skeleton Man]

Quote (hartlenb @ May 16 2005,1:56)

Quote (Skeleton Man @ May 13 2005,9:55) Newark has the jones sockets here.. I followed that link and the connector picured only has 7 pins (6 plus the round one).  Have you purchased this p# before and received the 9 pin connector?

Ignore the picture.. it's a generic picture used for all the sockets.. go by the part number: S-2408-CCT (S = socket, P = plug, 08 = 8 pins)

[jasmine64]

Funtronics has a replacement socket, but not the jones plug or locking clip.

Still chasing down the other things I need in memphis should get another call from them.

[Skeleton Man]

Quote (jasmine64 @ May 16 2005,6:19)

Funtronics has a replacement socket, but not the jones plug or locking clip. Still chasing down the other things I need in memphis should get another call from memphis.

Jones Plug

[jasmine64]

Thanks, I have it bookmarked.