|
SodaShopNick
|
 |
« on: July 08, 2022, 09:23:41 pm » |
|
I am having an issue with my Vendor 44 where the crank handle seems to be jammed. If I put either two nickels or one dime in it the handle simply won't budge. To be honest I don't use the coin part much as I have never really found a good way to stock it with 8oz bottles, so most of the time I just open the door and take a soda out. But, in the past the coin mech has always worked on a dime or two nickel. I have had issues before where the handle has been stuck down and was given the advice from this group to use a screwdriver underneath it as it does get jammed and this has worked, but in this case I cannot get the handle to even move. It appears that either the two nickels or one dime are in the right slots, but again the handle will not move. I will be posting a few pictures. Any help with this would be appreciated.
|
|
|
|
|
Logged
|
|
|
|
|
SodaShopNick
|
|
« Reply #1 on: July 08, 2022, 09:40:11 pm » |
|
At this point I can only get one of my pictures converted from the HEIF format of my iPhone to a JPEG that is smaller than 300k. I will see if I can figure out how to get the other ones posted.
|
|
|
|
|
Logged
|
|
|
|
|
johnieG
|
|
« Reply #2 on: July 09, 2022, 08:11:57 am » |
|
Send your photos from your phone to yourself via email & open them with paint & edit their size if necessary & “save as” the format you need, jpeg, etc.
|
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001...  Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
SodaShopNick
|
|
« Reply #3 on: July 09, 2022, 08:14:26 am » |
|
Thanks Johnny, I will try that. I did though send my photos to my computer via AirDrop and then changed to JPG and tried to re-size them, but I could not get them smaller than 300K. Let me try to email them as you suggested and see what happens.
|
|
|
|
|
Logged
|
|
|
|
|
SodaShopNick
|
|
« Reply #4 on: July 09, 2022, 08:17:14 am » |
|
Okay, Johnny, that may have worked. Here they are:
|
|
|
|
|
Logged
|
|
|
|
|
SodaShopNick
|
|
« Reply #5 on: July 17, 2022, 10:31:33 am » |
|
Does anyone have any thoughts. If a better description or more pictures are needed please let me know. Thank you.
|
|
|
|
|
Logged
|
|
|
|
|
MoonDawg
|
|
« Reply #6 on: July 17, 2022, 03:07:26 pm » |
|
Your last picture shows 5 small notches that a spring loaded cog rides over and prevents the handle from returning too soon. (Makes that clicking sound )
But you should have 9 notches visible at the home position, meaning that cog is stuck half way.
Use your screwdriver again to free it up.
|
|
|
|
|
Logged
|
Glen
|
|
|
|
SodaShopNick
|
|
« Reply #7 on: July 17, 2022, 03:09:57 pm » |
|
Thank you, I will try that.
|
|
|
|
|
Logged
|
|
|
|
|
SodaShopNick
|
|
« Reply #8 on: July 17, 2022, 07:56:53 pm » |
|
So I tried to unjam this by using a screwdriver against the small notches, but it won't budged. Also, even though the notches are showing not in the home position the handle is and will not budge. Lastly, I have had the issue before that when I pushed the handle down to get it to dispense the handle gets stuck in the down position and a screwdriver has always been able to unjam it. Any other thoughts would be appreciated. Maybe I am trying to unjam it incorrectly.
|
|
|
|
|
Logged
|
|
|
|
|
Jim
|
|
« Reply #9 on: July 18, 2022, 07:02:24 am » |
|
Open the main cabinet door to disengage the coin mech from the drum index unit.
At this point I would diagnose each component separately, the coin mech and the vending drum which could also attribute to this issue.
With the cabinet door open, you may be able to get some movement on the shaft allowing for ratchet paw to be rotated off the teeth in the hopes of resetting the cycle...
|
|
|
|
|
Logged
|
My six cents, Jim  |
|
|
|
SodaShopNick
|
|
« Reply #10 on: July 18, 2022, 09:43:46 am » |
|
Thanks Jim, I will try that.
|
|
|
|
|
Logged
|
|
|
|
|
SodaShopNick
|
|
« Reply #11 on: July 24, 2022, 06:00:32 pm » |
|
Still no luck with the door open. It is jammed up good...or bad. Any other thoughts would be appreciated as I feel like I am missing something simple.
|
|
|
|
|
Logged
|
|
|
|
|
Jim
|
|
« Reply #12 on: July 25, 2022, 03:07:57 pm » |
|
Nick,
Can you email the larger format pictures as your resized are just a little too small for me to see details...?
|
|
|
|
|
Logged
|
My six cents, Jim |
|
|
|
SodaShopNick
|
|
« Reply #13 on: July 25, 2022, 07:08:31 pm » |
|
Thanks Jim, I will try that and re-add the pictures.
|
|
|
|
|
Logged
|
|
|
|
|
|
|
SodaShopNick
|
|
« Reply #15 on: July 25, 2022, 08:56:29 pm » |
|
Done and thank you!
|
|
|
|
|
Logged
|
|
|
|
|
SodaShopNick
|
|
« Reply #16 on: July 29, 2022, 07:37:39 pm » |
|
So far no luck with this. Jim tried, but could not figure it out. If anyone else has any ideas please let me know.
|
|
|
|
|
Logged
|
|
|
|
|
collecture
|
|
« Reply #17 on: October 02, 2022, 10:58:55 pm » |
|
If the fault is with the coin mech, I can solve your issue. I repair and restore coin mechanisms. Hard to tell what the issue is without seeing, touching, etc.
Most old timer people here know me.
Message me your contact info.
Tom
|
|
|
|
|
Logged
|
Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
|
|
|
|
SodaShopNick
|
|
« Reply #18 on: January 07, 2023, 11:12:34 am » |
|
Hi Tom, I am so sorry I missed this message, but thank you and I will message you my contact info.
Thanks,
Nick
|
|
|
|
|
Logged
|
|
|
|
|
