Evaporator fan needed for coke cavalier USS 8 64

[Coke536]

Does anyone have a source for a replacement fan motor for the evaporator?   It's about 2 1/2 inches tall and smaller than the condenser fan motor.   I checked with the forum sponsors and they don't carry them. Thanks.

[kbareit]

If you have the round evaporator you need a #EP4 from Soda Jerk Works or a #11F from Funtronics.

[johnieG]

The USS-64 is a late model and has the rectangular Evaporator, it should take a standard unit bearing motor about a 6-watt/120Volt/1550 RPM, it mounts using the three rear #6 threaded bolts as I recall. if you have an earlier Cs or CSS model with a round evaporator coil, you can also use a standard unit bearing style motor, but only if it has a single side mounting "foot"