SMC Discussion Areas
November 26, 2024, 06:49:36 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > Trouble-Shooting > Vending Mechanisms (Moderators: johnieG, Jim) > Correct change light not lighting up?
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Correct change light not lighting up?  (Read 4234 times)
0 Members and 1 Guest are viewing this topic.
87bob
Newbie
*
Offline Offline

Posts: 37


Old enough to know better still to young to care!
« on: November 21, 2013, 06:40:12 pm »
As the title says the correct change light does not light up when the change tubes are empty. Has anyone got any suggestions as to what is causing this? The wires are intact no voltage present at the spade connectors
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #1 on: November 21, 2013, 07:03:12 pm »
Cavalier, Vendo, model number etc. Huh???
Logged
Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
87bob
Newbie
*
Offline Offline

Posts: 37


Old enough to know better still to young to care!
« Reply #2 on: November 21, 2013, 07:34:37 pm »
Sorry it's a caviler USS-8-64 I have done some additional checking the Coinco acceptor has a reed missing in one of the coin tubes. Since there is only one I suspect that because somewhere along the way it was removed the device thinks there is still coins in the one tube. If I find a good deal on a coin acceptor I'll replace it.
 
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!