Looking for a coin mech for a round top U-Select-it candy machine.

[rainbowvend]

Recently ran across a really clean U-select-it round top candy machine.  Somebody has removed the coin mech.  Wondering where I can get one for this machine. 

[zadd]

I have one that needs some work if your interested . It has been modified with a quarter slug rejector . I would assume you could get a dime rejector and change it back ?

[rainbowvend]

Thanks for your reply!  Yes, I want the system set up for a dime.  What sort of work do you think your unit needs?  Also,  wondering where I could get the dime slug set up versus the quarter system. 

[zadd]

The mech was never ment for a quarter mech . (To big )

[davethebirdman]

Can you not just change over the slug rejector or has the coin mech been channelled out to task the larger coin??

[zadd]

Just needs the 10 cent  slug rejector changed out . The metal tab (nickel or dime)  has been filed but could be repaired . I bought a nice original off of eBay so this is a spare .

[davethebirdman]

The slug rejector should be the easy bit to get. The actual coin mech I would imagine is going to be the difficult one.

I'd grab it and work out the slug rejector later.