SMC Discussion Areas
November 26, 2024, 06:46:50 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > Restorations > General (Moderators: johnieG, Jim) > wire management
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: wire management  (Read 5205 times)
0 Members and 2 Guests are viewing this topic.
boss
5 Cent Member
**
Offline Offline

Posts: 69


Cautiously Optimistic


WWW
« on: September 03, 2013, 10:45:22 am »
I'm considering completely rewiring my USS-8-64K.  The problem I'm having is finding replacement flexible sheathing/conduit to run the wires through.  My machine originally used a clear, flexible plastic product called Temflex 105C, but I can't find a non-industrial or non-military source to purchase a small quantity from.

With that being said... what do you guys use as conduit/sheathing?  My main concern is where it has to pass through existing holes in the door.
Logged
Fresh, not from concentrate.
wee
10 Cent Member
***
Offline Offline

Posts: 223
« Reply #1 on: September 03, 2013, 12:01:18 pm »
I used the clear tubing you can get at the big box stores on my Vendo 80....See pics below.



Brian
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #2 on: September 03, 2013, 04:24:18 pm »
Wee's correct, it's just clear PCV tubing sold at many big-box hardware stores.
Logged
Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
boss
5 Cent Member
**
Offline Offline

Posts: 69


Cautiously Optimistic


WWW
« Reply #3 on: September 03, 2013, 04:45:07 pm »
the problem I'm having is that the tubing they sell is not the correct diameter to fit through the pre drilled holes in the cabinet.
Logged
Fresh, not from concentrate.
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #4 on: September 03, 2013, 06:00:10 pm »
? It's a vending machine, not a vintage Corvette, use a drill...  laugh
Logged
Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
boss
5 Cent Member
**
Offline Offline

Posts: 69


Cautiously Optimistic


WWW
« Reply #5 on: September 03, 2013, 06:35:36 pm »
you haven't seen me with a drill.   biggrin
Logged
Fresh, not from concentrate.
Yarochrehc
Soda Jerks
*****
Offline Offline

Posts: 787
« Reply #6 on: September 03, 2013, 07:51:35 pm »
It does come in differant wall thickness
Logged
Bob

Restored
Vendo H63B  Coke in use in basement
Original
Vendo V/VF63/7  Pepsi in use

Restoring: Glascock Standard
(2) Vendo 63
(2)Vendo 90
Vendo 126  waiting for paint
VMC 56
Westinghouse WE-6
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!