Cornelius Type 120 Coin mech missing Free vend Questions.

[Deacon]

Ok Guys,
      I have looked at the LONG thread about free vend but I guess my Machine being a newer one
or maybe because of the brand.  Isn't wired the same.  I don't have anything attached to pin 1. 
I  Have taken apart the Box that the Plug is mounted on and found a three prong molex plug tied to the
wiring of the Jones plug.  Two of the Pins on that are HOT and one seems to be a neutral.  If I jumper Pin 8
to Pin 6 I hear the Vending Solenoid click.  but no vend when I select a flavor.  So Then I figured that maybe someone
wired the Whole plug backwards and tried jumpering pin 2 and 6 together and the switch between 6 and 8 no joy.

I must be doing something wrong does anyone know how to make this work.

Deacon

[Creighton]

Cornelius went their own way at times. Any chance you can post pics?
Creighton

[Deacon]

Here are the Photos of the Wiring and a picture of the out side.

Deacon

[Deacon]

ok I found this schematic listed for a different model Cornelius then Mine
But I think The Wiring to the jones plug is the same as mine.  So What Wires Do I need to
Connect Together To Allow For Free Vending


Deacon

[johnieG]

1 & 3 , same as the free play switch diagram, I read your earlier posts & I believe you read the pinout backwards on your machine, the wiring diagram you've shown is correct, it's just pins 1 & 3.

pay attestation to the sold out switches & any carrier/vend ready ("vend-in-progress" switches in your case) switches on the rack. some machines required a minimum number of cans/bottle to be loaded into all of the selection columns before it would accept any coins or allow the selection buttons to activated.

[Deacon]

Thank you so much for the info going to go pick up more sodas and try wiring it to pins 1 & 3  and see what happens tomorrow.

Wish me luck boys.

 

[Kilroy]

I just want to say good luck. We're all counting on you.

[Deacon]

OK Maybe partial success.  I am hearing a click from the Credit relay under the jones plug.
however.  I am not getting a vend.  I am wondering if it is because I am missing one
of the vend relays.  for slot number 5.   I am wondering if the relays might be wired in
series.  I would think that would be a stupid way to do it but I can't rule it out yet.  
Hoping that I am wrong.  By The way my local electronics store doesn't seem to have
this relay it is a Potter & Brumfield KU-4366.  Does anyone have an extra one that they can
sell me.


Deacon

[Norrisk66]

You should be able to get that relay from grainger.com. If you aren't trying to keep it original- I would just wire in a universal relay. You should be able to find a relay socket with "pigtails" that you could butt-splice in place.

[tkaz]

Just to make sure, do you have enough product in the column you are selecting to ensure that the sold out paddles are de-activated?

[Deacon]

Yes I have a case of soda in each selection.

Deacvon