need a little Help on A Cav CS 64 F

[Pat Pixley]

Ok restoring a Cavalier CS64F and in a hurry I forgot to snap a picture of the coin Door Hinge  area , So I'm stuck and
need to see a picture of the inside hinge area .



this the parts ,and here is a picture of the machine



So a photo would help get right in there if you can .

Thanks
 Pat

[Funtronics]

Here are the only pictures that I have. I took these when I restrored one a few months back for my son. Hope this helps..

[memorylane]

This help, same type of door

[Pat Pixley]

What I need is to see how the long red narrow peice fits and where it goes ? To the  Coin Door or to the main door ?
 Thanks

[tkaz]

Checked all my photos and a bunch online and can't find a single one that shows the inside of the hinge, looks like it was setup different on the CSS and USS machines

[Pat Pixley]

Does anybody have a old cavalier CS64 that they can snap a few picture of so I can get this figured out  ??
 really need the help.

 THanks
  Pat

[memorylane]

Pat I beleave that piece fits between the hinges on the bottle door. There should be screws holes when you open the bottle door, it's a filler piece.

[memorylane]

Hope this helps

[MoonDawg]

       I checked my Cavaliers and the coin doors attatch directly to the machine with the stainless hinge you show in your pic. Maybe the red piece goes somewhere else?

[cohammer]

don't know if this helps

[Pat Pixley]

Is that cap catcher there  if so can you remove it and re-snap a picture   Thanks Pat

[memorylane]

Is this it above the coin return plunger

[cohammer]

sorry it took me a while to get back,I think that flat bar is the one inside the door below and between the hinges