SMC Discussion Areas
November 23, 2024, 06:28:17 am
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News
:
Home
Help
Login
Register
SMC Discussion Areas
>
The Coin Return
>
Tutorials & Tips
(Moderator:
Jim
) >
Alternative material for new 8oz bottle shims in a V80
Pages: [
1
]
Go Down
« previous
next »
Print
Author
Topic: Alternative material for new 8oz bottle shims in a V80 (Read 5205 times)
0 Members and 1 Guest are viewing this topic.
jholmgren
Soda Jerks
Offline
Posts: 1288
Alternative material for new 8oz bottle shims in a V80
«
on:
June 03, 2012, 09:01:42 pm »
Greetings folks,
I noticed a few threads on materials to use for shimming the columns in a V80 (and other) machine in order to be able to stock the new slimmer middle 8oz bottles. As you all probably know, the old 6 1/2 oz bottles are just a bit thicker around the middle.
A common practice is to use some 1/8" plexiglass to make the shims, in fact Fun-Tronics sells a complete pre-cut kit along with tape and everything.
While at my local Home Depot today I was unable to find any plexi in 1/8" thickness. Everything they had was 3/32...just a hair thinner than 1/8" so it 'might' have worked OK, but everyone says 1/8". Plus it was expensive as heck and cutting plexiglass is a bit of a PITA.
That's when I noticed they sell a material called "coroplast" - corrugated plastic. It is commonly used to make outdoor signs. It was listed at 4mm thickness which is just a wee bit larger than 1/8". As a bonus, it was only $4 for a 24" x 18" sheet - more than enough to make a complete set of 8 shims! Well worth it to use as an experiment.
When I got home I cut some shims, attached them to the sides of the vending columns with double-sided carpet tape and loaded a case of the new-style bottles. It worked like a charm!
Coroplast is super easy to work with - you can cut through it with a standard utility knife, pocket knife or even a decent pair of scissors, no saw required. Since it is plastic, it won't get 'soggy' in the interior of your machine and should last practically forever.
I will admit that plexi is nice because it is clear, but for the cost and ease of use I'm very happy with the coroplast.
Just tossing this out there for anyone looking for a quick and easy (and cheap!) fix. Here's what mine looks like:
Jim
«
Last Edit: June 03, 2012, 09:04:30 pm by jholmgren
»
Logged
Embossed Coke Ideal 55 Slider
VMC-44
Vendo V-80
Westinghouse WE-6
tkaz
Soda Jerks
Offline
Posts: 1900
tkaz
Re: Alternative material for new 8oz bottle shims in a V80
«
Reply #1 on:
June 05, 2012, 11:15:03 pm »
Jim, thanks for posting this, I'm sure it'll work the same for a V44 and save some folks some $$!
Logged
http://etsy.com/shop/luceantica
Pages: [
1
]
Go Up
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
The Coin Return
-----------------------------
=> Soda-Machines.Com News
=> Other Coin-Op's
=> General Chit Chat
=> Estimated Values
=> Tutorials & Tips
-----------------------------
Soda Machines, Coolers & Dispensers
-----------------------------
=> Pre 60's Machines & Coolers
=> Post 60's Machines & Coolers
=> Picnic Coolers
=> Syrup Dispensers
-----------------------------
Trouble-Shooting
-----------------------------
=> Coin Mechanisms
=> Refrigeration
=> Vending Mechanisms
-----------------------------
Restorations
-----------------------------
=> General
=> Refinishing
-----------------------------
The Vending Rack
-----------------------------
=> Swap Meet Area
Loading...