|
|
|
johnieG
|
 |
« Reply #1 on: May 07, 2004, 10:05:43 pm » |
|
Well Jim actually ...Yes! It's my Sisters machine & I helped her post her auction!!!, so what do you need to know  '>
it's arranged the same as a WC-78-MD & has the 12 oz. can adapters inside (removeable) that & adjustable racks that can also handle up to 12oz. glass bottles, it can out of a local Dearborn, Mi. Ford dealerships service dept. & has been at her home for over 1-1/2 years now, runs flawlessly & quite as a mouse!. it's got a shorter sign than the 78/MD, & other than that it shares all the same internals with that model, that's the actual model no. off of the tag & is the second machine of it's type I've layed hands on personally , I picked it up in MtClemens MI. & I know of another up in the Bridgeport/Birchrun area. I haven't seen any info around on it & notice that Steve Ebner didn't even mention it in his vol II book? but it's real, & the pictures you saw are taken in my garage!
|
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001...  Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
johnieG
|
|
« Reply #2 on: May 07, 2004, 10:10:30 pm » |
|
More!...
|
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
johnieG
|
|
« Reply #3 on: May 07, 2004, 10:14:19 pm » |
|
and again
|
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
Jim
|
|
« Reply #4 on: May 08, 2004, 10:52:07 am » |
|
Thanks Johnie!
I know I'm not the most knowledgeable, but I never recall seeing anything on this particular model...
I know I'm way behind on some updates to the Soda Machines Section; perhaps you could get another photo that has the complete machine and forward it to me...?
Are the dimensions you posted accurate? It's only an inch shorter than the WC-78...
Thanks again!
|
|
|
|
|
Logged
|
My six cents, Jim  |
|
|
|
johnieG
|
|
« Reply #5 on: May 08, 2004, 09:50:47 pm » |
|
Sure I have lot's of Pic's & I can send them along to you, also subtract 3-1/2" for the added caster height!
|
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
Bob K
|
|
« Reply #6 on: May 10, 2004, 11:28:50 am » |
|
I saw this machine on ebay also. I emailed the seller (you, johnnieg? - who knew?) asking why the "Things Go Better..." graphics were missing from one side. I figured it for a repaint, so I hesitated. Usually these have a "Westinghouse" logo on the bottom in white, so the fact that it was missing (painted over?) made me concerned.
It's a cool machine. Where the heck would you find the missing trim, though?
Bob K
|
|
|
|
|
Logged
|
|
|
|
|
johnieG
|
|
« Reply #7 on: May 10, 2004, 04:53:55 pm » |
|
Well, I was told the Coke logos are only die-cut vinyl, so when the Coke guy came out to convert it over from bottles to cans, only the left side of the machine was exposed to the public in the dealerships waiting area/lounge (the right side was abutted against a candy vending machine with the whole area built into a paneled alcove, so although it's on casters, it only rolled to the rear of the enclosure.) so being the energetic type, he stuck one only on that side along with the "In 12oz. cans" sticker. the Westinghouse logo only apears on the ID Tag.
|
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
|
|
Jim
|
|
« Reply #9 on: May 17, 2004, 08:31:32 am » |
|
Bob,
To answer your question regarding "On Site Repairs, upgrades & painting, Yes...
I had a friend that worked for Coca-Cola during the late 50's into the early 60's... His role was to do just that; convert, upgrade, and paint machines at the place of business. He would tell me that he would move the machine away from the wall, hang drop clothes along the way to prevent over-spray, and procede to spray the machines...
During his employment, he converted many machines into "white top" machines as well as other misc. modifications...
Write A Book! There's a good concept!
Soooo much information spread all over the place...
|
|
|
|
|
Logged
|
My six cents, Jim |
|
|
|
|
|
|
|
