SMC Discussion Areas
November 23, 2024, 08:52:56 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Compressor noisy and hot  (Read 5947 times)
0 Members and 1 Guest are viewing this topic.
Guest
« on: March 31, 2004, 08:36:13 pm »

Hi there,
I have Vendo 44, and the compressor usually made a little funny "ding-dong" sound, when it went on  .  Today I noticed the funny tune was gone and noticed the compressor is also extremely hot - can hardly touch it.  Is it normal, that the compressor is hot, when it's on ?  It cools down a bit, when it's off.  The coke is still cold.  Or is my compressor dead soon, and how to get it replaced ?  Can I change the part myself and from where to get a new compressor or should it be done by a refridgerator repair shop ? Any advice is appreciated.
Thanks,
Jonne
Logged
Guest
« Reply #1 on: March 31, 2004, 09:07:34 pm »

.....more
I noticed the lower fan, next to the compressor is not running smootly and it gets stuck here and there making a sound.  Could this be the problem, also making the compressor hot, because the fan does not cool the condenser.
Thanks,
Jonne
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #2 on: March 31, 2004, 09:56:05 pm »

Yep!!! you found the problem! First don't run the machine until you get a new condensor fan motor! unplug it for now. the "ding-dong" sound you heard was probably the fan blade hitting the condersor coils , or sometimes it's the copper lines themselves hitting the chassis as they are rattled a little when the compressor starts, also make sure the coil isn't loose & hitting the fan blade when the compressor starts, as this can jiggle things around quite a bit do to the vibration of the compressor itself. hope it helps...JohnieG
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Guest
« Reply #3 on: April 01, 2004, 09:12:29 am »

Thanks JohnieG.  I unplugged the machine right after I found the problem.  Any ideas, from where I can find the new motor ?
Jonne
Logged
Guest
« Reply #4 on: April 01, 2004, 10:25:18 am »

Howdy,
You should be able to buy a fan from Eric at Global Compressors (toll free 877-856-4996).  He's a really easy guy to work with and specializes in vintage machines.  Have a good day.
A J
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #5 on: April 01, 2004, 03:24:47 pm »

Yes, several of the suppliers listed on this site can get you a replacement, but be aware that your fan may not fit onto the new motor, so you'll have to get a new fan also. you can try at grainger supply here's a link
http://www.grainger.com/Grainger/wwg/start.shtml

and heres the exact page for unit bearing motors

http://www.grainger.com/Grainger/searchresults.jsp?xi=xi

have fun!   '<img'>
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!