Westinghouse DU-144

[kg4mon]

Does anyone have or know where to get parts for these?    I have just purchased a du144 and needing all of the rubber seals.  I looked on fun-tronics site and seen some of the small door welting and main door seal by the foot.  I would rather have the one piece main door seal but understand these may not be reproduced.  I also need a door handle assembly.  The handle is totally missing. I need a cap catcher and a drip pan too.   I have searched on the internet for the last couple of days but I haven't been able to find much on these machines.  It is in perfect working condition and cools great (well it did, I just took it apart and got it back yesterday from the sand blaster, starting the body work next week). 

Thanks Rick

[SIGNGUY]

Funtronics is probably going to be your best bet...

[loman4ec]

Use the by the foot and where they meet use super glue and it becomes one piece. have them meet at the bottom and you will never see it.

[kg4mon]

That's what I was thinking about for main door seal.  Thanks  Fun-tronics doesn't seem to have the drain pan , cap catcher, and door handle.  I also didn't see the main seal for the smaller cola door. It's thicker than the main door seal.   Anybody else? I will certainly get what I can from them.  I emailed them with the parts I needed but didn't get a response so I figured they couldn't help.  Should I post this in the swap meet area?

[loman4ec]

The DU-144 is not a very common machine. As for a drain pan I have found a mason jar works just fine. Is there something wrong with your bottle door seal? It may be similar to one of the other machines. If you need one I would try and find a bigger replacement seal and cut it down.

[kg4mon]

Yeah it's very hard and has some cracks and splits in it.  I figured it being my first coke machine I would pick the one hardest to find parts for.  Just my luck.