Vendo 63

I have purchased my first machine.  It is a vendo 63.  It cools great, but The coin mech is not working.  The change just runs through it.  How can I fix it to vend the pop through the door.  Also the paint is ok, but it has some over spray on it from something.  What can I use to take the over spray off but not dammage the original paint.  Thanks in advance!

[Pat Pixley]

That is a great first machine to start with . The Coin Mech.
is it a Coinco  ifit is we can help you  I have a manual on
that. And as far as the over spray try a little polishing
compound ( I like the white compound) then try a small
spot  first  and then go from there .

Pat P.   '>

I believe it is a coinco.  How can I be sure?

[johnieG]

there'll be a label on the side with the model no. probably a s75-9800 series.

[Pat Pixley]

There should be a decal on the side of the coin Mech.
 with the make and the model number on it  they are on
 the metal coin mech also.  The slug chute  cover
on some will also have coinco  embossed in that.
Hope that helps.

Pat p.  '>

if the changer is green and all metal , it is a vara price '>