Menu Content/Inhalt
SMC Discussion Areas
July 06, 2008, 03:29:08 am *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: How to open the box?  (Read 215 times)
0 Members and 1 Guest are viewing this topic.
russelltatedotcom
Newbie
*
Offline Offline

Posts: 37
« on: April 06, 2008, 06:33:15 pm »
Hi Guys I am trying to replace the T-Stat and cable on my flat top vmc 56 but I can't seem to get the power supply open? The side panel flicked off OK for the Evap motor wires but the main body seems to be clamped tight, I didn't want to force it incase the bakelite shattered anybody got any ideas?

thanks
Russell
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 2344
« Reply #1 on: April 06, 2008, 07:46:11 pm »
you must carefully drill out the center holes/ hollow rivet securing the bottom cover to the shell, then use a long threaded screw & nut to reassemble it.
Logged
Yea, 220...221, whatever it takes.
russelltatedotcom
Newbie
*
Offline Offline

Posts: 37
« Reply #2 on: April 07, 2008, 01:04:54 am »
Just checking here...

So, physically drill out (as in destroy!)with a powerdrill the brass section in the middle?

thanks
Russell
Logged
Jim
Administrator
Soda Jerks
*****
Offline Offline

Posts: 2537


#1 Soda Jerk!


WWW
« Reply #3 on: April 07, 2008, 07:47:50 am »
If you're careful, you won't destroy it.
Get a drill bit slightly larger that the hole and slowly drill until the brass ring begins to spin, that's it!
After rewiring, install as before with a ground wire attached to the new mounting bolt/screw.
Logged
My six cents,

Jim
russelltatedotcom
Newbie
*
Offline Offline

Posts: 37
« Reply #4 on: April 07, 2008, 08:42:14 pm »
thanks JIM Smiley

RT
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.5 | SMF © 2006-2008, Simple Machines LLC
Joomla Bridge by JoomlaHacks.com 		Valid XHTML 1.0! Valid CSS!