Menu Content/Inhalt
SMC Discussion Areas
May 18, 2008, 07:40:06 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: cooling problem  (Read 252 times)
0 Members and 1 Guest are viewing this topic.
Ryan
Newbie
*
Offline Offline

Posts: 3
« on: March 23, 2008, 05:08:22 pm »
hey, so i'm looking for a little help with regards to a 1968 cornelius 50-0838. this isn't the compact one, but the upright bottle vending machine. all works when it is plugged in the vending, and all three blowers. it just won't get cold. i cleaned out all the fins and such, yet no go. any ideas? here is a pic of it as well
Logged
Pat Pixley
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 1504


Soda Jerk
« Reply #1 on: March 23, 2008, 05:30:11 pm »
Hello Ryan and welcome to the site. Hate to say this but sound like it
lost it R-12 , now there are people here that  can you better
what to check for but if everything come on  that what it sound like to me.

  We have a great guy here Eric at Global compressor that maybe able
to help you out , he is in the  SMC Directory give him a call.

 Pat
« Last Edit: March 23, 2008, 09:31:54 pm by Pat Pixley » Logged
Friends don't let friends buy woodgrain.
Ryan
Newbie
*
Offline Offline

Posts: 3
« Reply #2 on: March 23, 2008, 05:33:51 pm »
do you know if these are sealed units? can you service them as is? any way to tell if there is a leak before putting in the r12?
Logged
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 2378
« Reply #3 on: March 23, 2008, 08:21:19 pm »
      The answer is YES to all 3 questions you asked.  Cool
Logged
Glen
Ryan
Newbie
*
Offline Offline

Posts: 3
« Reply #4 on: March 23, 2008, 09:05:24 pm »
isn't that a daisy, how would one service and leak check it?
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 2292
« Reply #5 on: March 24, 2008, 12:31:58 pm »
Unless you are trained & have the right equipment, It's not a do it yourself kind of job,

first you need to see if you have a service valve on the system (low side /larger copper tubing coming out of the cold side / evaporator, next you'll need an R12 service gauge set & appropriate hoses, then you'll need a vacuum pump, replacement gas, (R12, Hotshot,Freeze12, etc.) an electronic type leak detector for small leaks & maybe some liquid bubble type leak detector for larger leaks, a refrigerant scale to measure a replacement charge, & a tank of dry nitrogen & a regulator to pressure test the system, a brazing torch,

see, easy as pie!

About the only think you could do if your system does have a service valve on the low side of the compressor tubing, then you could just run a quick pressure check with teh system running & you should get about 20-30 psi on the low side with R12.
Logged
Yea, 220...221, whatever it takes.
kellybus1
Newbie
*
Offline Offline

Posts: 5
« Reply #6 on: March 25, 2008, 03:57:22 am »
Are you sure the compressor is runng? Try getting a amp meter and clamp it on one of the wires comming out of the compressor. If it's running you will see a amp draw. No amp meter, then put your hand on the compressor and feel for viberation. LOL Cool
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.5 | SMF © 2006-2008, Simple Machines LLC
Joomla Bridge by JoomlaHacks.com 		Valid XHTML 1.0! Valid CSS!