Creighton,
It's a piece of cake. I just finished putting one back together.
You have to take the inner panel off to disconnect the light up sign wires.
Undo the coin mech harness. I used 3 different colors of tape on the wires that I had to cut. (blue, pink and black wire)
Then I cut the wire in the middle of the tape so when I went to splice them back I
could easily tell which ones went where. I also took some pics of the wires and made a schematic of which posts of the jones plug they came off. After I had it apart for a year
(not all my fault) those pics came in handy.
Then the nuts on the upper hinge and lift the door out.

Hope this helps
rz