Menu Content/Inhalt
SMC Discussion Areas
November 21, 2008, 06:28:46 pm *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: CoinCo S75-9800B Problem  (Read 855 times)
0 Members and 1 Guest are viewing this topic.
Guest
« on: February 07, 2007, 02:08:45 pm »
I have a Dixie Narco 440 with a CoinCo S75-9800B when I put change in it goes straight to the coin return.
I tried to wire in a Free Vend switch and I get a click sound from the vend relay but nothing happens when I push the dispense buttons. Any helpful ideas or suggestions? I'm new to this and would like to set this up in my shop for pop and beer. Would like to set the price at 5 cents and have done that. But coins just fall thru. Thanks
Logged
beazle00
Guest
« Reply #1 on: February 07, 2007, 03:06:11 pm »
I have coinco 9200, I get the same prob with more mordern coins i.e. plated ones.  I'm not sure if the 9800b does the same thing but you could try putting some older coins thru it and see if it accepts them.  Have you read the 9800 manual you can get it at the coinco website http://www.coinco.com/coin/faq/servicematerials/909826_1.pdf .  If that doesn't help, seems like the common answer I've seen is that the logic board is gone.  Good thing is that these can be had for cheap on Ebay.
Logged
BryanH
Soda Jerks
*****
Offline Offline

Posts: 1356


Sweatin' in Arizona... but it's a dry heat!


WWW
« Reply #2 on: February 07, 2007, 03:44:15 pm »
try cleaning the slug rejector (the top piece).  I can get gummed up and that can cause all coins to drop straight through.
Logged
Thanks, Bryan
   Cavalier USS-96: unrestored, working on the back patio
   CV VUB/C 8-91: a fantasy restoration?
   GE Cooler: in pieces, my next project
sodaworks
Soda Jerks
*****
Offline Offline

Posts: 3108
« Reply #3 on: February 07, 2007, 09:00:47 pm »
Remove the slug rejector and run it through the dish washer. This works wonders.
Logged
TERRY@SODAWORKS RESTORATIONS
Lots of Round Top machines
Buy-Sell-Trade-Restorations
collecture
Soda Jerks
*****
Offline Offline

Posts: 2715
« Reply #4 on: February 07, 2007, 09:55:26 pm »
I don't have too many machines with electronic mechs.
After a good cleaning  - I have never had any problems with old or new coins. Everybody always says that the new coins just won't work, but I have honestly found no difference.
Logged
Cav 27, 33 embossed, CS-55E-2, 72
SelectiVend 48 DP
1930s DP Counter Cooler(Restored)
Glasco 50
Vendo Coin Changers (ea. style-nice orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 56RT, 80SS, 81A (nice orig), 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westinghouse WC-44SK, WD-5, WB60
Victor C-1
Ridewithme38
10 Cent Member
***
Offline Offline

Posts: 159
« Reply #5 on: February 08, 2007, 01:37:40 am »
I had this problem with my CoinCo S75-9800B Turned out nothing was wrong with the coin changer

My machine needed atleast one can in each slot for it to vend anything so if i had any slots without a can in it it would just drop the change straight through
Logged
Vendo V165B(StyleStar)---Coinco S75-9800B
UltraVend 3 selection bulk candy machine


Looking for decals or picture of an original Vendo V165B...willing to pay premium for accurate decals and or pictures..
Guest
« Reply #6 on: February 08, 2007, 07:54:29 am »
Thanks everyone, I'll try all these suggestions and report back.
Logged
Guest
« Reply #7 on: February 09, 2007, 07:58:01 am »

(Ridewithme38 @ Feb. 08 2007,1:37)
QUOTE
I had this problem with my CoinCo S75-9800B Turned out nothing was wrong with the coin changer

My machine needed atleast one can in each slot for it to vend anything so if i had any slots without a can in it it would just drop the change straight through

That was the problem, I didn't have enough cans in each slot to make it work. Like I said, I'm new to this and now have a nice machine. Thanks "Ridewithme38" and all others for your help. What a great web site. Thank you
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.7 | SMF © 2006-2008, Simple Machines LLC
Joomla Bridge by JoomlaHacks.com 		Valid XHTML 1.0! Valid CSS!