Menu Content/Inhalt
SMC Discussion Areas
December 02, 2008, 02:05:19 pm *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Ideal 55 coin mech  (Read 216 times)
0 Members and 1 Guest are viewing this topic.
Guest
« on: October 21, 2002, 10:54:44 pm »
can anyone tell me how to remove the coin mech/box off an ideal 55. i removed the two screws on the bottom and the set screw on the flapper. are there two more screws to remove near the top and if so how do i get at them? thanks troy
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 2449
« Reply #1 on: October 22, 2002, 10:16:58 pm »
Sure no problem, first remove the allen bolt/set-screw  holding the flapper/gate onto the shaft, then remove the coin-box and remove the two screws in the bottom & rear of the coin-mech now grab the outside of the coin-mech chassis & pull the bottom out a little & give it a "nudge" upwards with your hand & remove the outer shell of the coin-mech. now you'lll have access to the two upper screws that hold the mounting plate portion of the coin-mech to the machine.
hope it helps...JohnieG ':<img:'>
Logged
Yea, 220...221, whatever it takes.
Guest
« Reply #2 on: November 02, 2002, 02:55:51 pm »
thanks johnieG on the tips! it was alot easier than i thought. this really is a great website, to find out info, parts or soda machines. thanks troy
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.7 | SMF © 2006-2008, Simple Machines LLC
Joomla Bridge by JoomlaHacks.com 		Valid XHTML 1.0! Valid CSS!