Menu Content/Inhalt
SMC Discussion Areas
January 07, 2009, 11:17:25 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Jumper?  (Read 176 times)
0 Members and 1 Guest are viewing this topic.
Pixel
5 Cent Member
**
Offline Offline

Posts: 84
« on: January 06, 2006, 08:04:51 pm »
In my Choice Vend, in the lower compartment, to the right of the compressor deck, I have a black terminal which I believe is where the power cord plugs into the machine. On that same terminal above the power cord, there is a short loop of stiff wire covered in red insulation-the wire appears to be at least 1/8" thick.

The wiring diagram seems to indicate this is some sort of jumper for the defrost system, but I'm not sure. The ends of the loop make a plug.

When the machine is operating normally, should this jumper be plugged in? What's it for?

Thanks.
Logged
Machines I own.

Choice Vend CVC-224 - needs a good bit of work
Cavalier CSS-8-64 - awaiting a couple of body parts
---------------------------------------------------------------------------
1982 Renault LeCar - a bit beat up but still runs. Only chills sodas in winter. Wink
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 2475
« Reply #1 on: January 08, 2006, 03:42:01 pm »
It's been a while since I sold my Choicevend, but as I recall, the jumper should remain connected, & only removed to plug in the optional defrost option, if it doesn't have one , don't "sweat it" (bad pun)  ':p'
Logged
Just smile and wave boys, smile and wave...
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.7 | SMF © 2006-2008, Simple Machines LLC
Joomla Bridge by JoomlaHacks.com 		Valid XHTML 1.0! Valid CSS!