Menu Content/Inhalt
SMC Discussion Areas
January 08, 2009, 01:55:04 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Lighting  (Read 171 times)
0 Members and 1 Guest are viewing this topic.
Guest
« on: November 27, 2005, 12:00:59 am »
i have a machine v348/198 serial 7rk014576 and i cannot identify the type of flourescent bulb required. both bulbs i tried burned out instantly and i cannont find any sticker that identifies the correct bulb.  thank you '<img'>
Logged
glassbottlesrule
25 Cent Member
****
Offline Offline

Posts: 265
« Reply #1 on: November 27, 2005, 08:40:20 am »
Usually if thebulb fits, it's probably the right one.  Sounds like you have a bad ballast to me.
Logged
Big machines need love too

Vendo 154 (Coke Stylestar-woodgrain)
VMC 110  (Pepsi-square corner)
VMC 56  (Mountain Dew-someday wip)
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 2475
« Reply #2 on: November 27, 2005, 08:48:17 am »
The "popping" of new flourescent bulbs is caused by a shorted ballast(s), & it(they) will have to be replaced,as for replacing the light bulbs, they should be marked on either end of the bulb itself (as an example, F15/T12-14CW would be as follows... "F15"=flourescent/15 watt, "T12" =tubular size/12 , "14CW" = 14 inch nominal length/Cool white color.  as I recall from the same machine I just sold this month, they were about F40/T12-60/63 CW...but that's just an estimate, you'll have to check at a lighting store as the big box stores, HomeDepot, Menards, Lowes, etc. don't carry a big selection of the odd sizes...
Logged
Just smile and wave boys, smile and wave...
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.7 | SMF © 2006-2008, Simple Machines LLC
Joomla Bridge by JoomlaHacks.com 		Valid XHTML 1.0! Valid CSS!