Menu Content/Inhalt
SMC Discussion Areas
November 22, 2008, 12:10:33 pm *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Vendo lock  (Read 186 times)
0 Members and 1 Guest are viewing this topic.
Kevin C
Soda Jerks
*****
Offline Offline

Posts: 971
« on: June 20, 2005, 03:39:30 pm »
Hello

How do you remove the back retaining nut on the coin door lock? Two of my machines I had to drill the locks off & the whole lock came right apart because I could remove the slide lock bar.  Now I have two machines with (V126-V56) that have complete locks but I cant remove the back nut because the slide bar is in the way. Is there a special wrench?

Let me know

Kevin
Logged
Vendo 63-C   On the job
Vendo 56   Going back together
Vendo 56-C    Waiting for rehab!
Vendo 126  Rough outside but loaded & operational
Vendo 110  Under repair
Ideal 55 -  **For Sale make offer
Glasco 55 -  Waiting
Royal 650  On the job
Lance Snack Machine - On the job
jasmine64
Soda Jerks
*****
Offline Offline

Posts: 969
« Reply #1 on: June 20, 2005, 03:59:42 pm »
If yours is like mine, I just inserted a screwdriver near the top of the slide bar and nut and applied a little pressure it slid up just a little way and I was able to
get the screwdriver in there and remove the other screws.

Post a pic, this way i'll know if i gave you accurate info or not.
Logged
Marsha

Cav. CD 22
Choice Vend 168 - Use daily.
Kevin C
Soda Jerks
*****
Offline Offline

Posts: 971
« Reply #2 on: June 20, 2005, 05:28:49 pm »
Hey

The home computer is belly up right now so no pictures.  This is not a screw but the large nut that holds the lock barrel in place.

Kevin
Logged
Vendo 63-C   On the job
Vendo 56   Going back together
Vendo 56-C    Waiting for rehab!
Vendo 126  Rough outside but loaded & operational
Vendo 110  Under repair
Ideal 55 -  **For Sale make offer
Glasco 55 -  Waiting
Royal 650  On the job
Lance Snack Machine - On the job
Creighton
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 2042
« Reply #3 on: June 20, 2005, 05:35:15 pm »
Kevin,
Just remove the cam first. Its a close fit you just get a small turn. Give it some Liquid Wrench or oil and you may be able to spin it off with your fingers. Or just take the slide out of the way. It's just a couple of cotter keys on mine.
Creighton
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.7 | SMF © 2006-2008, Simple Machines LLC
Joomla Bridge by JoomlaHacks.com 		Valid XHTML 1.0! Valid CSS!