SMC Discussion Areas

Trouble-Shooting => Coin Mechanisms => Topic started by: on October 21, 2002, 10:54:44 pm

Title: Ideal 55 coin mech
Post by: on October 21, 2002, 10:54:44 pm

can anyone tell me how to remove the coin mech/box off an ideal 55. i removed the two screws on the bottom and the set screw on the flapper. are there two more screws to remove near the top and if so how do i get at them? thanks troy

Title: Ideal 55 coin mech
Post by: johnieG on October 22, 2002, 10:16:58 pm

Sure no problem, first remove the allen bolt/set-screw holding the flapper/gate onto the shaft, then remove the coin-box and remove the two screws in the bottom & rear of the coin-mech now grab the outside of the coin-mech chassis & pull the bottom out a little & give it a "nudge" upwards with your hand & remove the outer shell of the coin-mech. now you'lll have access to the two upper screws that hold the mounting plate portion of the coin-mech to the machine.
hope it helps...JohnieG :;):

Title: Ideal 55 coin mech
Post by: on November 02, 2002, 02:55:51 pm

thanks johnieG on the tips! it was alot easier than i thought. this really is a great website, to find out info, parts or soda machines. thanks troy