|
Title: Grease? Post by: 90grad on July 27, 2005, 06:30:41 am All,
I tore down the can rack on my VMC 56 and noticed some type of grease in gate release mechanism that runs vertically up the side of the rack. I am going to repaint the rack, but I want to put the right grease back in there. Any suggestions? Title: Grease? Post by: Jim on July 27, 2005, 07:55:11 am Wayne,
I think your best bet would be White Lithium Grease. I utilize it in a tub container as opposed to spray because I think the spray is a little too messy. I have a little brush that I can apply the grease onto or into the moving parts' area. Title: Grease? Post by: loman4ec on July 27, 2005, 08:43:55 am I agree with Jim. White Lithium is great stuff. I didn't know they made it in anything other than spray. I am going to have to buy a tub of it. The spray is messy.
Title: Grease? Post by: 90grad on July 27, 2005, 09:17:05 am Thanks, guys. Is this stuff readily available at places like Home Depot?
Title: Grease? Post by: jasmine64 on July 27, 2005, 09:38:20 am I purchased a small tube of it at Sears a few months ago. I have used it on all the hinges in my house and car doors. and on my choice vend 168.
Title: Grease? Post by: Ltransam on July 27, 2005, 12:05:55 pm Hello,Wayne
Any Auto Parts store Should ? carry it .I have it in the tub also .Got it from Auto-Zone Ltransam Title: Grease? Post by: sodaworks on July 28, 2005, 01:52:36 pm White Lithium grease is the only way to go.
Powered by SMF 1.1.7 |
SMF © 2006-2008, Simple Machines LLC
Joomla Bridge by JoomlaHacks.com |